More Paint / Tail Housing / Wheel Wells - 05/09/2010
If I didn't already explain it, this T56 came from a 2001 Viper. It has a Fbody input shaft, front plate, bell housing, and tail housing. I bought it 98% done. I just had to have the tail housing machined to accept the viper seal. It was machined for the bushing, but for some reason the seal section hadn't been touched.
I've also included some shots of the work I've been doing over the last few weeks paint wise:
All done with POR15
I also coated my transmission tunnel with 3M Rubberized Underbody spray, but I didn't get pictures of it because I didn't want to remove my masking while it was still wet.
I think that does it for paint except for little things like the Brake booster, which I'll probably do with a rattle can. I'm excited because I'm about to start putting things back IN the car